Texas Instruments LM3704YCMM-308/NOPB

Voltage supervisor & reset IC with power fail input, low-line output & manual reset 10-VSSOP -40 to 85

Processor Supervisor 3.08V 1 Active Low/Open Drain Automotive 10-Pin VSSOP T/R

Volt Supervisor Supply 3.0954V 1V to 5.5V 10-Pin VSSOP T/R

Processor Supervisor 3.08V 28uA 10-Pin MSOP T/R

SUPERVISOR, PFC, LLO, MR, MSOP10; Tension de seuil: 3.08V; Nombre de superviseurs / moniteurs: 1Moniteurs(s); Tension, alimentation min.: 1V; Tension, alimentation max..: 5.5V; Type de reset: Actif bas; Boîtier de CI numériqu

Supervisor, Pfc, Llo, Mr, Msop10; Threshold Voltage:3.08V; No. Of Supervisors/Monitors:1Monitors; Supply Voltage Min:1V; Supply Voltage Max:5.5V; Reset Type:Active-Low; Digital Ic Case:Msop; No. Of Pins:10Pins; Delay Time:200Ms; Rohs Compliant: Yes |TEXAS INSTRUMENTS LM3704YCMM-308/NOPB

The LM3704/LM3705 series of microprocessor supervisory circuits provide the maximum flexibility for monitoring power supplies and battery controlled functions in systems without backup batteries. The LM3704/LM3705 series are available in MSOP-10 and 9-bump micro SMD packages. Built-in features include the following: Reset: Reset is asserted during power-up, power-down, and brownout conditions. RESET is guaranteed down to VCC of 1.0V. Manual Reset Input: An input that asserts reset when pulled low. Power-Fail Input: A 1.225V threshold detector for power fail warning, or to monitor a power supply other than VCC. Low Line Output: This early power failure warning indicator goes low when the supply voltage drops to a value which is 2% higher than the reset threshold voltage.