Analog Devices AD7791BRM

Low Power, Buffered 24-Bit Sigma-Delta ADC | IC ADC 24BIT SIGMA-DELTA 10MSOP

16BIT ADC, SMD, 7791, MSOP10; Termination Type:SMD; Case Style:MSOP; Pins, No. of:10; Temperature, Operating Range:-40°C to +105°C; A/D, D/A Features:DSP, MicroWire, QSPI, SPI; Base Number:7791; Bits, No. of:16; IC Generic Number:7791; Logic Function Number:7791; Temp, Op. Max:105°C; Temp, Op. Min:-40°C; Voltage, Vcc:5V

The AD7790/AD7791 are low-power, complete analog front ends for low frequency measurement applications. The device consumes 65 µA of current typically when operated with a 3 V power supply and 75 µA typical when operated with a 5 V power supply with the buffer disabled. The AD7791 contains a 24-bit S-D ADC with one differential input, which can be buffered or unbuffered. The AD7790 is a 16-bit version of the AD7791. The AD7790 has a peak-to-peak resolution of 16 bits at the default output data rate of 16.6 Hz while the AD7789 has a peak to peak resolution of 19 bits, which is equivalent to an effective resolution of 21.5 bits at this output data rate. The device operates from an internal clock. Therefore, the user does not have to supply a clock source to the device. The output data rate from the part is software programmable, allowing rates from 9.5 Hz to 120 Hz. The p-p resolution from the part varies with the programmed output data rate. With an output data rate of 16.6 Hz, simultaneous 50 Hz/60 Hz rejection is achieved. Power supply monitoring is also included. The part can be used in single conversion mode whereby the device powers up, performs a single conversion and then returns to powerdown mode. Alternatively, it can be operated in continuous mode. In continuous conversion mode, the part can be configured to continuously read i.e. the conversions are placed on the serial bus automatically as soon as a conversion is complete (the user does not need to write to the ADC to read the data), assuming that the serial clock is applied to the device. The AD7790/AD7791 is housed in a 10-lead MSOP package.