Texas Instruments TPS2010D

5.5-V, 0.4-A, 95-mΩ, load switch 8-SOIC -40 to 85

Current Limit SW 1-IN 1-OUT 2.7V to 5.5V 0.2A 8-Pin SOIC Tube

IC, HIGH SIDE MOSFET PWR SW, 5.5V 8-SOIC

Power Muxes and Current Limited Switches .4A 2.7-5.5V HiS

Tube TPS2010 Current Limiting (Fixed) Over Temperature e4 power distribution switch 4.9mm 2.7V 200mA 725mW

IC PWR SWITCH N-CHAN 1:1 8SOIC

IC 0.4A PWR DIST SWITCH 8-SOIC

CURRENT LIMITED POWER DISTRIBUTION SWTCH<AZ

TPS2010 0.4A, 2.7 TO 5.5V SINGLE

The TPS201x family of power-distribution switches is intended for applications where heavy capacitive load sand short circuits are likely to be encountered. The high-side switch is a 95-m\Omega N-channel MOSFET. Gate drive is provided by an internal driver and charge pump designed to control the power switch rise times and fall times to minimize current surges during switching. The charge pump operates at 100 kHz, requires no external components, and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short circuit is present, the TPS201x limits the output current to a safe level by switching into a constant-current mode. Continuous heavy overloads and short circuits increase power dissipation in the switch and cause the junction temperature to rise. If the junction temperature reaches approximately 180oC, a thermal protection circuit shuts the switch off to prevent damage. Recovery from thermal shutdown is automatic once the device has cooled sufficiently. The members of the TPS201x family differ only in short-circuit current threshold. The TPS2010 is designed to limit at 0.4-A load; the other members of the family limit at 1.2 A, 2 A, and 2.6 A (see the available options table). The TPS201x family is available in 8-pin small-outline integrated circuit (SOIC) and 14-pin thin shinksmall-outline (TSSOP) packages and operates over a junction temperature range of -40oC to 125oC. Versions in the 8-pin SOIC package are drop-in replacements for Siliconix's Littlefoot(TM) power PMOS switches, except that GND must be connected. Copyright (C) 1995, Texas Instruments Incorporated Production DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.