Texas Instruments LP2988IMM-2.8/NOPB

Micropower, 200 mA Ultra Low-Dropout Low Noise Voltage egulator with Prog. Power-On eset Delay 8-VSSOP -40 to 125

Obsolete Positive Fixed Enable voltage regulator linear -40C~125C 200mA 16V

LDO Regulator Pos 2.8V 0.2A 8-Pin VSSOP T/R

IC REG LINEAR 2.8V 200MA 8-VSSOP

2.8 V FIXED POSITIVE LDO REGULATOR 0.35 V DROPOUT PDSO8

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor. The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise. Using an optimized VIP(TM) (Vertically Integrated PNP) process, these regulators deliver superior performance: Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical). Ground Pin Current: 1 mA @ 200 mA load, and 200 uA @ 10 mA load (typical). Sleep Mode: The LP2987/8 draws less than 2 uA quiescent current when shutdown pin is held low. Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin. Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with guaranteed accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.