Texas Instruments LM385M-1.2/NOPB

1.235-V, 0°C to 70°C, micropower voltage reference diode 8-SOIC 0 to 70

Micropower Voltage Reference Diode Rohs Compliant: Yes |TEXAS INSTRUMENTS LM385M-1.2/NOPB.

V-Ref Precision 1.235V 20mA 8-Pin SOIC N Rail

IC, SM, SHUNT, VOLT REF, 1.235V; Termination Type:SMD; Case Style:NSOIC; No. of Pins:8; Base Number:385; Temp, Coeff, +:150ppm/°C; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Voltage, Reference:1.235V

The LM185-1.2/LM285-1.2/LM385-1.2 are micro power 2-terminal band-gap voltage regulator diodes. Operating over a 10uA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185-1.2 makes it useful for micro power circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185-1.2 is rated for operation over a -55*C to 125*C temperature range while the LM285-1.2 is rated -40*C to 85*C and the LM385-1.2 0*C to 70*C. The LM185-1.2/ LM285-1.2 are available in a hermetic TO-46 package and the LM285-1.2/LM385-1.2 are also available in a low-cost TO-92 molded package, as well as SO and SOT-23. The LM185-1.2 is also available in a hermetic leadless chip carrier package.