Infineon PVA3054NPBF

SSR RELAY SPST-NO 50MA 0-300V / Solid State SPST-NO (1 Form A) 8-DIP (0.300", 7.62mm), 4 Leads

Relay SSR 25mA DC-IN 0.05A 300V AC/DC-OUT 4-Pin PDIP Tube

Relay;Solid State;SPST-NO;Ctrl-V 1.25DC;0.05A;300VAC;PCB Mnt;Thru Hole;4Pin

1 Form A Photovoltaic Relay in a mod. 8-pin DIP Package, DIP8, RoHS

PVA3054xx Series 1.2 VDC SPST-NO HEXFET® Power MOSFET Photovoltaic Relay

RELAY, PHOTOVOLTAIC; Load Voltage Max:300V; Load Current:50mA; On State Resistance Max:160ohm; Contact Configuration:SPST-NO; Isolation Voltage:4kV; Forward Current If:25mA; Relay Terminals:Through Hole; SVHC:No SVHC (18-Jun-2012); Base Number:3054; Control Current Max:25mA; Control Current Typ:5mA; Control Voltage Type:DC; Current Load AC Max:40mA; Current Temperature:40°C; Dielectric Strength Voltage Vrms:2500V; Load Current DC Max:40mA; Load Current Max:50mA; Load Current RMS Max:50mA; Load Voltage Range:0V to 300V; Logic Function Number:3054; Mounting Type:Through Hole; No. of Pins:4; No. of Poles:1; Nominal Control Current DC:5mA; Off State Resistance Min:10Gohm; On Resistance Rds(on):160ohm; On State AC Resistance @ temp:160ohm; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Operating Voltage V(pk) Max:300V; Output Type:MOSFET; Package / Case:DIL-8; Peak Load Voltage +:300V; Peak Load Voltage -:300V; RMS Load Voltage Max:4000V; RMS Load Voltage Min:0VAC

300 V, 50 mA single-pole Photovoltaic Relay in a mod. 8-pin DIP Package. This normally open solid-state relay can replace electromechanical relays used for general purpose switching of analog signals. The PVA30 Series combines very low solid-state output capacitance, very high off-state resistance and very fast response times. These Photovoltaic Relays are designed specifically to accurately switch low-level signals in highperformance instrumentation systems. The PVA30 Series overcomes the limitations of both conventional electromechanical and reed relays by offering the solid state advantages of long life, fast operating speed, low pick up power, bounce-free operation, low thermal offset voltages and miniature package. These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, automatic test equipment and data acquisition. The PVA30 can switch analog signals from thermocouple level to 300 Volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 1.7kHz are achievable. The extremely small thermally generated offset voltages allow increased measurement accuracies.