Analog Devices AD8383ACPZ

IC SUPERVISOR 3 CHANNEL SOT23-8

DRIVER, DECIMATING LCD, LFCSP-48; Driver IC Type:LCD; Segments, No. of:6; Interface Type:Non Multiplexed; Data / Control Interface:Serial 3 Wire; Voltage, Supply Min:9V; Voltage, Supply Max:18V; Case Style:LFCSP; No. of Pins:48; Operating Temperature Range:0°C to +85°C; Base Number:8383; Termination Type:SMD

The AD8383 provides a fast, 10-bit latched decimating digital input that drives six high voltage outputs. 10-bit input words are sequentially loaded into six separate, high speed, bipolar DACs. Flexible digital input format allows several AD8383s to be used in parallel for higher resolution displays. STSQ synchronizes sequential input loading, XFR controls synchronous output updating, and R/L controls the direction of loading as either left-to-right or right-to-left. Six channels of high voltage output drivers drive to within 1.3V of the rail. For maximum flexibility, the output signal can be adjusted for dc reference, signal inversion. The AD8383 is fabricated on the 26 V, fast bipolar XFHV process developed by ADI. This process provides fast input logic, bipolar DACs with trimmed accuracy and fast settling, high voltage, precision driver amplifiers on the same chip. The AD8383 dissipates 0.7W nominal static power. The STBY pin reduces power to a minimum, with fast recovery. The AD8383 is offered in a 48-lead, 7mm x 7mm x 0.85mm LFCSP package and operates over the commercial temperature range of 0°C to 85°C.