onsemi FL7733AMX

Primary side controlled LED driver - 8LD, SOIC,JEDEC MS-012, .150" NARROW BODY

LED Driver with Power Factor Correction, Primary-Side-Regulated Primary-Side-Regulated LED Driver with Power Factor Correction

Tape & Reel (TR) Flyback Step-Down (Buck) Step-Up (Boost) Analog Surface Mount led driver 230.4mg 308V 70kHz -40C~125C TA

LED DRIV, BUCK-BOOST/FLYBACK, 70KHZ, SOP; Device Topology: Buck-Boost, Flyback; Input Voltage Min: 80V; Input Voltage Max: 308V; Output Voltage Max: 18V; Output Current Max: 180mA; Switch; Available until stocks are exhausted

The FL7733A is a highly-integrated PWM controller with advanced Primary-Side Regulation (PSR) technique to minimize components in low-to-mid-power LED lighting converters. Using an innovative TRUECURRENT® technology to provide tight tolerance constant-current output, this LED driver enables designs with constant current (CC) tolerance of less than 1% over the universal line voltage range to meet stringent LED brightness requirements.By minimizing turn-on time fluctuation, high power factor and low THD over the universal line range are obtained in the FL7733A. An integrated high-voltage startup circuit implements fast startup and high system efficiency. During startup, adaptive feedback loop control anticipates the steady-state condition and sets initial feedback condition close to the steady state to ensure no overshoot or undershoot of LED current.The FL7733A also provides powerful protections, such as LED short / open, output diode short, sensing resistor short / open, and over-temperature for high system reliability. The FL7733A controller is available in an 8-pin Small-Outline Package (SOP).