onsemi FXL2T245L10X

Voltage Level Translator, Bidirectional, 2 Inputs, 1.1 V to 3.6 V Supply, 3.5 ns Delay, UQFN-10

e4 ACTIVE (Last Updated: 5days ago) FXL2T245 Nickel/Palladium/Gold (Ni/Pd/Au) level shifter translator 24ns 1.4V 26mg -24mA

Voltage Level 24ns Tristate，Non-inverting 1 2 1.1V 3.6V Bidirectional 1.1V~3.6V 1.1V~3.6V QFN SMD mount，glue mount 2.1mm*1.6mm*500μm

VOLTAGE LEVEL TRANSLATOR, 2-BIT, UQFN-10; No. of Inputs: 2; Output Current: -; Propagation Delay: 3.5ns; No. of Pins: 10Pins; Logic Case Style: UQFN; Supply Voltage Min: 1.1V; Supply Voltage Max: 3.6V; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Logic Type: Voltage Level Translator; Product Range: -; Automotive Qualification Standard: -; MSL: MSL 1 - Unlimited; SVHC: No SVHC (27-Jun-2018)

The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCC to be powered-up first. Internal power down control circuits place the device in 3-STATE if either VCC is removed. The Transmit/Receive (T/R#) input determines the direction of data flow through the device. The OE# input, when HIGH, disables both the A and B Ports by placing them in a 3-STATE condition Product Highlights: Bi-directional interface between any 2 levels from 1.1V to 3.6V Fully configurable, inputs track VCC level Non-preferential power-up sequencing; either VCC may be powered-up first No power-up sequencing required Outputs remain in 3-STATE until active VCC level is reached Outputs switch to 3-STATE if either VCC is at GND Power-off protection Control inputs (T/R#, OE#) levels are referenced to VCCA voltage Packaged in 10-lead Pb-Free MicroPak (1.6mm x 2.1mm) package ESD protection exceeds: 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7) 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7) 1kV CDM ESD (per ESD STM 5.3) 200V MM ESD (per JESD22-A115 & ESD STM5.2)