onsemi FSA266L8X

FSA266 Series SPST-NO 5.5 V 13.5 Ohm Surface Mount Analog Switch - MICROPAK-8

Low Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch

Analog Switch Dual SPST 8-Pin MicroPak T/R

SPST, 2 Func, 1 Channel, CMOS, QCC8

ANALOGUE SW, SPST - NO, -40 TO 85DEG C;

IC SWITCH DUAL SPST-NO 8MICROPAK

IC SW SPST-NOX2 10OHM 8MICROPAK

The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog switch or 2-bit bus switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and low On Resistance over a broad VCC range. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The device is organized as a dual switch with independent CMOS compatible switch enable (OE) controls. When OE is HIGH, the switch is ON and Port A is connected to Port B. When OE is LOW, the switch is OPEN and a high-impedance state exists between the two ports. The enable inputs tolerate voltages up to 5.5V independent of the VCC operating range.