Texas Instruments DAC0800LCM/NOPB

150us Parallel 8-bit SOIC-16 Digital to Analog Converters (DAC) ROHS

DAC 1-CH Current Steering 8-bit 16-Pin SOIC N Rail

16-SOIC (0.154 3.90mm Width) Current - Unbuffered Multiplying DAC DAC0800 digital to analog converter 15V 150mus 6.6MHz 0.19LSB

IC, 8BIT DAC, PARALLEL, 16SOIC; Resolution (Bits): 8bit; Sampling Rate: -; Data Interface: CMOS, Parallel, TTL; Supply Voltage Range: ± 4.5V to ± 18V; ADC / DAC Case Style: SOIC; No. of Pins: 16Pins; Input Channel Type: Parallel; Operating Temperature Min: 0°C; Operating Temperature Max: 70°C; Product Range: -; Automotive Qualification Standard: -; MSL: MSL 1 - Unlimited; SVHC: No SVHC (27-Jun-2018); A/D / D/A Features: D/A; Base Number: 800; IC Case Style: SOIC; Linearity Error: 0.19%; No. of Bits: 8bit; No. of Channels: 1Channels; Operating Temperature Range: 0°C to +70°C; Output Type: Current; Settling Time: 100ns; Supply Current: 2.5mA; Supply Voltage Max: 36V; Supply Voltage Min: 4.5V; Termination Type: Surface Mount Device

The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads. The reference-to-full-scale current matching of better than +-1 LSB eliminates the need for full-scale trims in most applications, while the nonlinearities of better than +-0.1% over temperature minimizes system error accumulations. The noise immune inputs will accept a variety of logic levels. The performance and characteristics of the device are essentially unchanged over the +-4.5V to +-18V power supply range and power consumption at only 33 mW with +-5V supplies is independent of logic input levels. The DAC0800, DAC0802, DAC0800C and DAC0802C are a direct replacement for the DAC-08, D AC-08A, D AC-08C, and D AC-08H, respectively. For single supply operation, refer to AN-1525.