onsemi MC100EP116FAG

Product Range:-; Automotive Qualification Standard:-; Msl:- Rohs Compliant: Yes

Line Transceiver, 6 Func, 6 Driver, 6 Rcvr, ECL, PQFP32

Hex Transmitter/Receiver 32-Pin LQFP Frame

Differential Line Receiver / Driver

3V 5.5V LQFP-32 7mm*7mm*1.45mm

IC RCVR/DRVR HEX DIFF ECL 32LQFP

IC DIFFERENT RX/DRVR 6BIT 32LQFP

The MC10EP116/100EP116 is a 6-bit differential line receiver based on the EP16 device. The 3.0GHz bandwidth provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators. The VBB pin an internally generated voltage supply is available to this device only. For single-ended input conditions the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used decouple VBB and VCC via a 0.01uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used VBB should be left open. The design incorporates two stages of gain internal to the device making it an excellent choice for use in high bandwidth amplifier applications. The differential inputs have internal clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5V below VCC. The 100 Series contains temperature compensation.