onsemi MC10E116FNG

Quint Receiver 28-Pin PLCC Tube / IC LINE RCVR QUINT ECL 5V 28PLCC

Buffers & Line Drivers 5V ECL Quint Diff Line RCVR

Quint Differential Line Receiver

Line Receiver, 5 Func, 5 Rcvr, ECL, PQCC28

5 4.2V 5.7V Differential Receiver PLCC-28

ECL DIFFERENTIAL RECEIVER, 0 TO 85DEG C;

PLCC-28 Special Logic ICs ROHS

IC, ECL DIFF LINE RECEIVER, 5.7V, LCC-28; Device Type:ECL Differential Receiver; Output Level:ECL; Signaling Rate:-; Supply Voltage Min:4.2V; Supply Voltage Max:5.7V; IC Case / Package:LCC; No. of Pins:28Pins; Product Range:-; MSL:- RoHS Compliant: Yes

The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116 the E416 device may be of interest. Active current sources plus a deep collector feature of the MOSAIC III process provide the receivers with excellent common-mode noise rejection. Each receiver has a dedicated VCCO supply lead providing optimum symmetry and stability. If both inverting and non-inverting inputs are at an equal potential of > -2.5 V the receiver does not go to a defined state but rather current-shares in normal differential amplifier fashion producing output voltage levels midway between HIGH and LOW or the device may even oscillate. The VBB pin an internally generated voltage supply is available to this device only. For single-ended input conditions the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used VBB should be left open. The 100 Series contains temperature compensation.