Infineon TLE6251DSXUMA1

R-PDSO-G8 TLE6251 Tape & Reel (TR) CANbus interface driver 200mV 5mm 1MBd -40C~150C

Can Txrx, 1Mbaud, 1 Tx/rx, 5.25V, Soic-8 Rohs Compliant: Yes

CAN 1MBd Sleep/Standby 5V Automotive 8-Pin DSO T/R

1.0MBit/s, Bus Wake-up, CAN Transceiver, PG-DSO-8, RoHS

TLE6251 - AUTOMOTIVE CAN TRANSCE

IC CAN-TRANSCEIVER 1MBAUD 8DSO

CAN TXRX, 1MBAUD, 1 TX/RX, 5.25V, SOIC-8; IC Interface Type: CAN; No. of TX Buffers: 1; No. of RX Buffers: 1; Supply Voltage Min: 4.75V; Supply Voltage Max: 5.25V; Interface Case Style: SOIC; No. of Pins: 8Pins; Operating Tempe

The CAN-transceiver TLE6251DS is a monolithic integrated circuit in a PG-DSO-8 package for high speed differential mode data transmission (up to 1 Mbaud) and reception in automotive andindustrial applications. It works as an interface between the CAN protocol controller and the physical bus lines compatible to ISO11898-2/-5. As a successor to the first generation of HS CAN (TLE6250), the TLE6251DS is designed to provide an excellent passive behavior when the transceiver is switched off (mixed networks, terminal 15/30 applications) and a remote wake-up capability via CAN bus in low power mode. This supports networks with partially un-powered nodes. The TLE6251DS has two operation modes, the normal and the stand-by mode. These modes can be chosen by the STB pin. If the TLE6251DS is in stand-by mode and a message on the bus isdetected, the TLE6251DS changes the level at the RxD pin corresponding to the bus signal (wake-up flag). The TLE6251DS is also designed to withstand the severe conditions of automotive applications and to support 12 V and 24 V applications. The IC is based on the Smart Power Technology SPT® which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit.