Analog Devices AD706JNZ

ROHS3Compliant EAR99 AD706 Tube op amp amplifier circuit 9.27mm 0.0004muA 15V 800kHz

Operational Amplifier, 2 Func, 150uV Offset-Max, BIPolar, PDIP8

Op Amp Dual Low Power Amplifier ±18V 8-Pin PDIP N Tube

ANALOG DEVICES AD706JNZ Operational Amplifier, Dual, 800 kHz, 2 Amplifier, 0.15 V/s,2V to18V, DIP, 8 Pins

Op-Amp, 800Khz, 0 To 70Deg C, Dip-8; No. Of Channels:2Channels; Gain Bandwidth Product:800Khz; Supply Voltage Range:± 2V To ± 18V; Ic Case/Package:Dip; No. Of Pins:8Pins; Amplifier Type:General Purpose; Rail To Rail:- Rohs Compliant: Yes |Analog Devices, Inc. AD706JNZ

Amplifier Type = JFET Operational / Gain Bandwidth kHz = 800 / Slew Rate V/us = 0.15 / Input Offset Voltage uV = 30 / Input Bias Current pA = 50 / Amplifiers = 2 / Common Mode Rejection Ratio (CMRR) dB = 110 / Power Supply Rejection Ratio (PSRR) dB = 106 / Input Voltage Noise Density nV/√Hz = 15 / Supply Current uA = 750 / Dual Supply Voltage Min. V = 2 / Dual Supply Voltage Max. V = 18 / Operating Temperature Min. °C = 0 / Operating Temperature Max. °C = 70 / Package Type = PDIP / Pins = 8 / Mounting Type = Through Hole / Packaging = Tube / Length mm = 10.16 / Width mm = 7.62 / Height mm = 4.95 / Power Supply Type = Dual

The AD706 is a dual, low power, bipolar op amp that has the low input bias current of a JFET amplifier, but which offers a significantly lower IB drift over temperature. It utilizes super beta bipolar input transistors to achieve picoampere input bias current levels (similar to FET input amplifiers at room temperature), while its IB typically only increases by 5\Delta at 125oC (unlike aJFET amp, for which I B doubles every 10oC for a 1000\Delta increase at 125oC). The AD706 also achieves the microvolt offset voltage and low noise characteristics of a precision bipolar input amplifier. Since it has < 200 pA of bias current, the AD706 does not require the commonly used "balancing" resistor. Furthermore,the current noise is only 50 fA/\Delta Hz, which makes this amplifier usable with very high source impedances. At 600 \Theta A max supply current (per amplifier), the AD706 is well suited for today's high density boards. The AD706 is an excellent choice for use in low frequency active filters in 12-bit and 14-bit data acquisition systems, in precision instrumentation, and as a high quality integrator. TheAD706 is internally compensated for unity gain and is available in five performance grades. The AD706J is rated over the commercial temperature range of 0oC to +70oC. The AD706A is rated for the extended industrial temperature range of -40oC to +85oC. The AD706 is offered in two varieties of an 8-lead package: plastic mini-DIP and surface-mount (SOIC).