Texas Instruments LM78L05ACMX

Voltage Regulator; linear, LDO; fixed; Vout: 5-15V; Vin: 30V; 100mA; 0+125 deg.C; SMD; SO8

62dB(120Hz) 3mA Fixed 100mA 1 5V 6.7V 5V 35V 99mA 75mV SOIC-8 , 1.75mm

3-Terminal Positive Regulators 8-SOIC -40 to 85

Standard Regulator Pos 5V 0.1A 8-Pin SOIC N T/R

Ic,Volt Regulator,Fixed,+5V,Bipolar,Sop,8Pin,Plastic

Fixed Positive Standard Regulator, 5V, BIPolar, PDSO8

LM78L05 Tape & Reel (TR) Surface Mount Over Temperature Short Circuit voltage regulator linear 1.6V 1.75mm 100mA 750mW

FIXED POSITIVE STANDARD REG, 5VB

IC REG LINEAR FIXED POS STD REG

The LM78LXX series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment. The LM78LXX is available in the plastic TO-92 (Z) package, the plastic SO-8 (M) package and a chip sized package (8-Bump micro SMD) using National's micro SMD package technology. With adequate heat sinking the regulator can deliver 100mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating.