onsemi MC10EP90DT

e4 10EP90 Nickel/Palladium/Gold (Ni/Pd/Au) ECL level shifter translator 340ps 3.3V 6.5mm -50mA

Translator, Triple ECL Input to LVPECL / PECL Output

Translator ECL/LVECL to LVPECL/PECL 3-CH Unidirectional 20-Pin TSSOP W Tube

ECL to PECL Translator, 3 Func, Complementary Output, ECL, PDSO20

IC XLATOR TRPL ECL-PECL 20TSSOP

The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL translator. The device receives differential LVECL or ECL signals and translates them to differential LVPECL or PECL output signals. A VBB output is provided for interfacing with single ended LVECL or ECL signals at the input. If a single ended input is to be used the VBB output should be connected to the D input. The active signal would then drive the D input. When used the VBB output should be bypassed to ground by a 0.01 F capacitor. The VBB output is designed to act as the switching reference for the EP90 under single ended input switching conditions as a result this pin can only source/sink up to 0.5mA of current. To accomplish the level translation the EP90 requires three power rails. The VCC supply should be connected to the positive supply and the VEE connected to the negative supply. The 100 Series contains temperature compensation.