Analog Devices ADT75ARZ-REEL7

Temp Sensor Digital Serial (I2C, SMBus) 8-Pin SOIC N T/R

TEMPERATURE SENSOR, 125DEG C, NSOIC-8;

SOIC-8 Temperature Sensors ROHS

SENSOR DIGITAL -55C-125C 8SOIC

+/- 1 DEGREE CENTIGRADE ACCURATE

The ADT75 is a complete temperature monitoring system in 8-lead MSOP and SOIC packages. It contains a band gap temperature sensor and 12-bit Aanalog-to-digital converter (ADC) to monitor and digitize the temperature to a resolution of 0.0625°C. The ADT75 is pin and register compatible with the LM75 and AD7416. The ADT75 is specified for operation at supply voltages from 2.7 V to 5.5 V. Operating at 3.3 V, the average supply current is typically 200 µA. The ADT75 offers a shutdown mode that powers down the device and this mode gives a shutdown current of typically 3 µA. The ADT75 is rated for operation over the –55°C to +125°C temperature range. The A0, A1, and A2 pins are available for address selection. The OS/ALERT pin is an open-drain output that becomes active when temperature exceeds a programmable limit. The OS/ALERT pin can operate in either comparator or interrupt mode. Product Highlights On-chip temperature sensor allows an accurate measurement of the ambient temperature. The measurable temperature range is -55°C to +125°C. Supply voltage is 2.7 V to 5.5 V. Space-saving, 8-lead MSOP and 8-lead SOIC. Temperature accuracy is ±1°C maximum. Temperature resolution is 0.0625°C. Shutdown mode reduces the current consumption to 3 µA typical. Connect up to eight ADT75s to a single SMBus/I2C bus. Applications Isolated Sensors Environmental Control Systems Computer Thermal Monitoring Thermal Protection Industrial Process Control Power-system Monitors Hand Held Applications