Analog Devices ADM232LAR

Dual Transmitter/Receiver RS-232 16-Pin SOIC W Tube

R-PDSO-G16 Tube INTERNAL CHARGE PUMP RS232 interface driver 650mV 10.3mm 120Kbps -40C~85C

5V CMOS RS-232 DRIVER/RECEIVER

IC TX/RX DUAL RS-232 5VLP 16SOIC

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16

IC,ADM232LAR,RS-232 CIRCUIT <N V

IC TRANSCEIVER FULL 2/2 16SOIC

LED 0.48W WHT WTR CLR 3.5MM 2SMD

The ADM2xx family of line drivers/receivers is intended for all EIA-232-E and V.28 communications interfaces, especially in applications where ±12 V is not available. The ADM223, ADM230L, ADM235L, ADM236L and ADM241L feature a low power shutdown mode that reduces power dissipation to less than 5 µW, making them ideally suited for battery powered equipment. Two receivers remain enabled during shutdown on the ADM223. The ADM233L and ADM235L do not require any external components and are particularly useful in applications where printed circuit board space is critical. All members of the ADM230L family, except the ADM231L and the ADM239L, include two internal charge pump voltage converters that allow operation from a single +5 V supply. These converters convert the +5 V input power to the ±10 V required for RS-232 output levels. The ADM231L and ADM239L are designed to operate from +5 V and +12 V supplies. An internal +12 V to -12 V charge pump voltage converter generates the -12 V supply. The ADM2xxL is an enhanced upgrade for the AD2xx family featuring lower power consumption, faster slew rate and operation with smaller (1 µF) capacitors.