Texas Instruments SN65240PWR

Dual universal serial bus port transient suppressor 8-TSSOP -40 to 85

Trans Voltage Suppressor Diode, 60W, 6V V(RWM), Unidirectional, 2 Element, Silicon, MO-153AA

TVS Diodes VRWM=6V VBR(Min)=6.5V Ppp=60W TSSOP8_4.4X3MM

TVS DIODE ARRAY, 60W, 6V, TSSOP, FULL REEL

ESD Suppressors / TVS Diodes Dual USB Port

ESD Suppressor TVS Uni-Dir 6V 8-Pin TSSOP T/R

DUAL USB PORT TRANSIENT SUPPRESSOR<AZ

6V(Min) 60W 3A 7V 7V TSSOP-8 4.4mm

The SN65220 is a single transient voltage suppressor and the SN65240 and SN75240 are dual transient voltage suppressors designed to provide electrical noise transient protection to Universal Serial Bus (USB) 1.1 ports. Note that the input capacitance of the device makes it unsuitable for high-speed USB 2.0 applications. Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the USB transceiver and/or the US BASIC if they are of sufficient magnitude and duration. USB ports are typically implemented in 3-V or 5-V digital CMOS with very limited ESD protection. The SN65220, SN65240, and SN75240 can significantly increase the port ESD protection level and reduce the risk of damage to the circuits of the USB port. The IEC1000-4-2 ESD performance of the SN65220,SN65240, and SN75240 is measured at the system level. Therefore, system design impacts the results of these tests. A high compliance level may be attained with proper board design and layout.