Renesas HIP4086ABZ

Driver 1.5A 6-OUT High and Low Side 3-Phase Brdg Inv/Non-Inv Automotive 24-Pin SOIC W Tube

GULL WING RoHS Compliant Active Matte Tin (Sn) - annealed IC Gate Driver 15.6mm 95V 500mA 125C

HIP4086 Series 16 V 1.5 A Hex Output Three Phase Mosfet Driver - SOIC-24

Bridge Driver IC Operating temperature: -40...+125 °C Power supply: 7...15 V Package: SO-24 Sink output current: 0.5 A Source output current: 1.1 A

Mosfet Driver, Full Bridge, Soic-24; No. Of Channels:6Channels; Gate Driver Type:-; Driver Configuration:Full Bridge; Power Switch Type:Mosfet; No. Of Pins:24Pins; Ic Case/Package:Soic; Ic Mounting:Surface Mount; Sink Current:500Marohs Compliant: Yes |Renesas HIP4086ABZ.

IC, DRIVER, MOSFET, 80V, 0.5A; Device Type:MOSFET; Module Configuration:Full Bridge; Peak Output Current:500mA; Input Delay:45ns; Output Delay:30ns; Supply Voltage Range:7V to 15V; Driver Case Style:SOIC; No. of Pins:24; Operating Temperature Range:-40°C to +125°C; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2011); Base Number:4086; Fall Time tf:10ns; No. of Drivers:6; No. of Outputs:6; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Output Current:0.5A; Output Current + Max:1.7A; Output Voltage:101V; Package / Case:SOIC; Rise Time:20ns; Supply Voltage Max:15V; Supply Voltage Min:7V; Termination Type:SMD

The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0.5μs to 4.5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor drives. The only difference between the HIP4086 and the HIP4086A is that the HIP4086A has the built-in charge pumps disabled. This is useful in applications that require very quiet EMI performance (the charge pumps operate at 10MHz). The advantage of the HIP4086 is that the built-in charge pumps allow indefinitely long on times for the high-side drivers. To insure that the high-side driver boot capacitors are fully charged prior to turning on, a programmable bootstrap refresh pulse is activated when VDD is first applied. When active, the refresh pulse turns on all three of the low-side bridge FETs while holding off the three high-side bridge FETs to charge the high-side boot capacitors. After the refresh pulse clears, normal operation begins. Another useful feature of the HIP4086/A is the programmable undervoltage set point. The set point range varies from 6.6V to 8.5V.