onsemi MM74HCT273WM

D Flip-Flop, HCT Series, 1-Func, Positive Edge Triggered, 8-Bit, True Output, CMOS, PDSO20

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC W Rail

FAIRCHILD SEMICONDUCTOR MM74HCT273WMFlip-Flop, with Reset, Non Inverted, Positive Edge, D, 20 ns, 68 MHz, 4.8 mA, SOIC, 20 Pins

Positive edge 8μA 37ns@ 5V,50pF Non-inverting Non-inverting 1 4.5V 5.5V 4.8mA Master Reset HCT Single ended 6pF 4.8mA 68MHz SOIC-20 SMD mount 13mm*7.6mm*2.35mm

74HCT CMOS, SMD, 74HCT273, SOIC20; Flip-Flop Type:D; Propagation Delay:20ns; Frequency:68MHz; Output Current:4.8mA; Trigger Type:Positive Edge; IC Output Type:Non Inverted; Supply Voltage Range:4.5V to 5.5V; Logic Case Style:SOIC; No. of Pins:20; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (20-Jun-2011); Base Number:74; IC Generic Number:74HCT273; Logic Function Number:273; Logic IC Base Number:74273; Logic IC Family:HCT; Logic IC Function:Octal D-Type Flip-Flop With Reset; Positive-Edge Trigger; No. of Gates:8; No. of Inputs:1; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Type:Non Inverted; Package / Case:SOIC; Supply Voltage:5.5V; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:SMD

The MM74HCT273 utilizes advanced silicon-gate CMOS technology. It has an input threshold and output drive similar to LS-TTL with the low standby power of CMOS. These positive edge-triggered flip-flops have a common clock and clear-independent Q outputs. Data on a D input, having the specified set-up and hold time, is transferred to the corresponding Q output on the positive-going transition of the clock pulse. The asynchronous clear forces all outputs LOW when it is LOW. All inputs to this device are protected from damage due to electrostatic discharge by diodes to VCC and ground. MM74HCT devices are intended to interface TTL and NMOS components to CMOS components. These parts can be used as plug-in replacements to reduce system power consumption in existing designs.