onsemi MC12095DG

ECL Prescaler 8-SOIC (0.154 3.90mm Width) MC12095 clock generator circuit 5V 3GHz 8.7mA 8.7mA

Prescaler 3.3V/5V 2/4 2500MHz 8-Pin SOIC N Rail

Amplifiers- Audio 2.5GHz Low Power Prescaler w/ Standby

2.5 GHZ LOW POWER PRESCALER WITH STAND-BY MODE, LEAD FREE

ON SEMICONDUCTOR MC12095DG IC, SM, LOGIC, ECL, CLOCK GEN

Prescaler, ECL Series, 1-Func, PDSO8

Modulus Prescaler, 3Ghz, Soic-8; Clock Ic Type:Modulus Prescaler; Frequency:3Ghz; No. Of Outputs:1Outputs; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Clock Ic Case Style:Soic; No. Of Pins:8Pins; Operating Temperature Min:-40°Crohs Compliant: Yes |Onsemi MC12095DG

The MC12095 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. MOSAIC V technology is utilized to achieve low power dissipation of 24 mW at a minimum supply voltage of 2.7 V. On-chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output an external resistor can be added in parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control input (SW) selects the required divide ratio of 2 or 4. Stand-By mode is available to reduce current drain to 100 uA typical when the standby pin SB is switched LOW disabling the prescaler.