Analog Devices AD9238BST-20

2-CH 12-BIT FLASH METHOD ADC PARALLEL ACCESS PQFP64

Unipolar GULL WING QUAD Not Qualified Analog to Digital Converter -40C~85C 2V 212mW 20Msps

ADC Dual Pipelined 20Msps 12-bit Parallel 64-Pin LQFP

12BIT ADC, 3V 20MSPS, 9238, LQFP64; Termination Type:SMD; Case Style:LQFP; Pins, No. of:64; Temperature, Operating Range:-40°C to +85°C; Base Number:9238; Bits, No. of:12; IC Generic Number:9238; Linearity Error, ADC/DAC +:0.35LSB; Linearity Error, ADC/DAC -:0.35LSB; Logic Function Number:9238; Ratio, Signal to Noise:70dB; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Voltage, Vcc:3V

The AD9238 is a dual, 3 V, 12-bit, 20/40/65 MSPS analog to digital converter. It features dual high performance sample-and-hold amplifiers and an integrated voltage reference. The AD9238 uses a multistage differential pipelined architecture with output error correction logic to provide 12-bit accuracy and guarantee no missing codes over the full operating temperature range at up to 65 MSPS data rates. The wide bandwidth, differential SHA allows for a variety of user-selectable input ranges and offsets including single-ended applications. It is suitable for various applications including multiplexed systems that switch full-scale voltage levels in successive channels and for sampling inputs at frequencies well beyond the Nyquist rate. The AD9238 is suitable for applications in communications, imaging and medical ultrasound. Dual single-ended independent clock inputs are used to control all internal conversion cycles. A Duty Cycle Stabilizer (DCS) is available on the AD9238-65 and can compensate for wide variations in the clock duty cycle, allowing the converters to maintain excellent performance. The digital output data is presented in either straight binary or twos complement format. Out-of-range signals indicate an overflow condition, which can be used with the most significant bit to determine low or high overflow. Fabricated on an advanced CMOS process, the AD9238 is available in either a space saving 64-pin LQFP or 64-pin LF-CSP and is specified over the industrial temperature range (-40°C to +85°C). Applications Ultrasound equipment Direct conversion or IF sampling receivers WB-CDMA, CDMA2000, WiMAX Battery-powered instruments Hand-held scopemeters Low cost, digital oscilloscopes