Analog Devices AD5203ARZ100

Digital Potentiometer 64POS 100KOhm Quad 24-Pin SOIC W

IC DGTL POT 100KOHM 64TAP 24SOIC

4-CHANNEL, 64-POSITION DIGI-POT

The AD5203 contains four, 64-position digitally-controlled variable resistors (VR). These parts perform the same electronic adjustment function as a potentiometer, trimmer or variable resistor. Each VR offers a completely programmable value of resistance, between the A terminal and the wiper or the B terminal and the wiper. The fixed A to B terminal resistance of 10K ohm, or 100K ohm has a ±1% channel-to-channel matching tolerance with a nominal temperature coefficient of 700 ppm/°C. Wiper position programming defaults to midscale at system power ON when using the RS pin. Once powered the wiper position is programmed by a standard SPI, Microwire compatible serial data interface. In addition, a serial data output pin is available to daisy chain multiple packages to minimize the number of package-decode pins required from the system micro controller. The AD5203 is available in a 24-lead narrow-body plastic DIP, the 24 lead surface mount package, and the compact 1.1mm thin TSSOP-24 package. All parts are guaranteed to operate over the extended-industrial-temperature range of -40°C to +85°C. For pin compatible higher resolution applications, see the 256-Position AD8403 product. Applications Mechanical Potentiometer Replacement Programmable Filters, Delays, Time Constants Volume Control, panning Line Impedance Matching Power Supply Adjustment operating from +3 to +5 volt power supplies