Texas Instruments TPS2330IPW

3-V to 13-V hot swap controller with active low enable 14-TSSOP -40 to 85

Hot Swap Controller 1-CH 13V N-Channel Positive Voltage 14-Pin TSSOP Tube

Single Hot Swap Controller Rohs Compliant: Yes |TEXAS INSTRUMENTS TPS2330IPW.

Hot Swap and Power Distribution 3-13V Sngl w/Pwr Gd Rpt, Act-Lo Enable

Nickel/Palladium/Gold (Ni/Pd/Au) EAR99 TPS2330 Circuit Breaker Fault Timeout Slew Rate hot swap controller 5mm 1mA 3V~13V -40C~85C

The TPS2330 and TPS2331 are single-channel hot-swap controllers that use external N-channel MOSFETsas high-side switches in power applications. Features of these devices, such as over current protection (OCP), inrush-current control, output-power status reporting, and separation of load transients from actual load increases, are critical requirements for hot-swap applications. The TPS2330/31 devices incorporate under voltage lockout (UVLO) and power-good (PG) reporting to ensure the device is off at start-up and confirm the status of the output voltage rails during operation. An internal charge pump, capable of driving multiple MOSFETs, provides enough gate-drive voltage to fully enhance the N-channelMOSFETs. The charge pump controls both the rise times and fall times (dv/dt) of the MOSFETs, reducing power transients during power up/down. The circuit-breaker functionality combines the ability to sense overcurrentconditions with a timer function; this allows designs such as DSPs, that may have high peak currents during power-state transitions, to disregard transients for a programmable period.