Texas Instruments BQ2057DGK

Linear Battery Charger Li-Ion/Li-Pol 2000mA 4.1V 8-Pin VSSOP Tube

Low Dropout linear 1-cell Li-ion battery charge controller with AutoCompTM, 4.1V 8-VSSOP -20 to 70

EAR99 BQ2057 ACTIVE (Last Updated: 1week ago) Tube battery charger 5V 2A 0.65mm -20C~70C TA

Battery Management IC; Battery Type:Li-Ion, Li Polymer; Input Voltage Primary Max:18V; Charge Current Max:2A; No. of Series Cells:1; Package/Case:8-VSSOP; No. of Pins:8; Operating Temperature Range:-20°C to +70°C ;RoHS Compliant: Yes

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for cost-sensitive and compact portable electronics. They combine high-accuracy current and voltage regulation,battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoCompcharge-rate compensation in a single 8-pin IC. MSOP, TS SOP, and SOIC package options are offered to fit awide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057 inhibits charge until the battery temperatureis within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning,constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V (min), thebq2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass-element during the initial stage of the charge. After conditioning, the bq2057 applies a constant current tothe battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.