onsemi ML4800ISX

Power Factor Correction PWM CONTRLR 0.2mA 81kHz 16-Pin SOIC N T/R

ML4800 Series 5 V Surface Mount Boost PWM Controller - SOIC-16N

FAIRCHILD SEMICONDUCTOR ML4800ISX PFC, PWM CONTROLLER, SMD, SOIC16

ANG FG, Power Factor Correction and PWM Controller Combo

Power Factor Controller With Post Regulator, Voltage-mode, 1A, 250kHz Switching Freq-Max, BICMOS, PDSO16

CCM PFC + PWM Combination Controller

IC PFC CTRLR AVERAGE CURR 16SOIC

IC PFC CTR AV CURR 76KHZ 16SOIC

Converters PFC Controller PWM Combo

PFC, PWM CONTROLLER, SMD, SOIC16; UVLO:2.8V; Start-up Current:200µA; Operating Supply Current:5.5mA; Duty Cycle (%):95%; Frequency:250kHz; Digital IC Case Style:SOIC; No. of Pins:16; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (18-Jun-2010); Case Style:SOIC; Max Operating Temperature:85°C; Min Temperature Operating:-40°C; Base Number:4800; Controller Type:PWM; Input Current:10mA; Max Output Current:1A; Max Supply Voltage:16.5V; Min Supply Voltage:11V; Output Energy per Cycle:1.5µJ; Output Type:Voltage; SVHC (Secondary):Bis (2-ethyl(hexyl)phthalate) (DEHP) (18-Jun-2010); Termination Type:SMD; Output Voltage:6.7V

The ML4800 is a controller for power factor corrected, switched mode power supplies. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully complies with IEC1000-3-2 specification. Intended as a BiCMOS version of the industry-standard ML4824, the ML4800 includes circuits for the implementation of leading edge, average current, "boost" type power factor correction and a trailing edge, pulse width modulator (PWM). It also includes a TriFault Detec function to help ensure that no unsafe conditions will result from single component failure in the PFC. Gate-drivers with 1A capabilities minimize the need for external driver circuits. Low power requirements improve efficiency and reduce component costs. An over-voltage comparator shuts down the PFC section in the event of a sudden decrease in load Product Highlights: Internally synchronized leading-edge PFC and trailing-edge PWM in one IC TriFault Detect for UL1950 compliance and enhanced safety Slew rate enhanced transconductance error amplifier for ultra-fast PFC response Low power: 200A startup current, 5.5mA operating current Low total harmonic distortion, high PF Reduced ripple current in storage capacitor between PFC and PWM sections Average current, continuous boost leading edge PFC PWM configurable for current-mode or voltage mode operation Current fed gain modulator for improved noise immunity Overvoltage and brown-out protection, UVLO, and soft start