Analog Devices AD8205YRZ-R7

ROHS3Compliant EAR99 AD8205 Tape & Reel (TR) op amp buffer circuit 5mm 2mA 2mV 70dB

DIFF-AMP, 50KHZ, -40 TO 125DEG C, NSOIC; Available until stocks are exhausted

2mA 500mV/μs 50KHz 78dB 1 4.5V 5.5V 2mV 50KHz SOIC-8 SMD mount，glue mount 1.5mm(height)

Operational Amplifier, 1 Func, 4500uV Offset-Max, PDSO8

Special Purpose Amplifiers; AD8205YRZ-R7; ANALOG DEVICES; 8; SOIC; 5.5 V; 1

The AD8205 is a single-supply difference amplifier for amplify-ing small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends from -2 V to +65 V. The typical single-supply voltage is 5 V. The AD8205 is offered in an 8-lead SOIC package and rated for operation from -40°C to +125°C for the Y and W grade models. The H grade version of the AD8205 is rated from -40°C to +150°C. Excellent dc performance over temperature keeps errors in the measurement loop to a minimum. Offset drift is typically less than 15 µV/°C, and gain drift is typically below 30 ppm/°C. The output offset can be adjusted from 0.05 V to 4.8 V with a 5 V supply by using the VREF1 and VREF2 pins. With VREF1 attached to the V+ pin, and VREF2 attached to the GND pin, the output is set at half scale. Attaching both pins to GND causes the output to be unipolar, starting near ground. Attaching both pins to V+ causes the output to be unipolar starting near V+. Other offsets can be obtained by applying an external voltage to the VREF1 and VREF2 pins. Applications High-side current sensing in: Motor controls Transmission controls Diesel injection controls Engine management Suspension controls Vehicle dynamic controls DC-to-dc converters