Analog Devices AD7680BRMZ

1-Channel Single ADC SAR 100ksps 16-bit Serial 8-Pin MSOP Tube

ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, PDSO8

ANALOG DEVICES AD7680BRMZAnalogue to Digital Converter, 16 bit, 100 kSPS, 2.5 V, 5.5 V, MSOP

ADC SGL SAR 100KSPS 16BIT SERL 8MSOP

8-TSSOP 8-MSOP (0.118 3.00mm Width) AD7680 SPI PRODUCTION (Last Updated: 4weeks ago) analog digital converter 850mum 5.2mA 100ksps 26.4mW

IC, 16BIT ADC, SMD, 7680, MSOP8; Resolution (Bits):16bit; Sampling Rate:100kSPS; Data Interface:Serial, SPI; Supply Voltage Range - Analogue:2.5V to 4.096V, 4.5V to 5.5V; Supply Current:5.2mA; IC Case Style:SOP; No. of Pins:8; Operating Temperature Range:-40°C to +85°C; A/D / D/A Features:16; Base Number:7680; Conversion Time:8µs; Digital IC Case Style:MSOP; IC Generic Number:7680; Input Channel Type:Single Ended; Input Type:Single Ended; Linearity Error ADC / DAC +:4LSB; Linearity Error ADC / DAC -:4LSB; Logic Function Number:7680; No. of Bits:16; No. of Channels:1; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Package / Case:MSOP; Power Dissipation Ptot Max:26.4mW; Sample Rate:100kSPS; Sample Rate:0.1MSPS; Supply Voltage Max:5.5V; Supply Voltage Min:2.5V; Termination Type:SMD; Voltage Vcc:5V

The AD7680 is a 16-bit, fast, low power, successive-approximation ADC. The part operates from a single 2.5 V to 5.25 V power supply and features throughput rates up to 100 kSPS. The part contains a low-noise, wide bandwidth track/hold amplifier, which can handle input frequencies in excess of 100 kHz. The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and the conversion is also initiated at this point. There are no pipelined delays associated with the part. The AD7860 uses advanced design techniques to achieve very low-power dissipation at fast throughput rates. The reference for the part is taken internally from VDD. This allows the widest dynamic input range to the ADC. Thus the analog input range for the part is 0 to VDD. The conversion rate is determined by the SCLK frequency.