Texas Instruments SN74ALVC7805-25DLR

74ALVC7805 Width Tape & Reel (TR) 8542.32.00.71 fifo memory 40MHz 40muA 0.635mm 25ns

IC MEMORY FIFO 256X18 56-SSOP / Synchronous FIFO 4.5K (256 x 18) Uni-Directional 40MHz 15ns 56-SSOP

FIFO Mem Sync Dual Width Uni-Dir 256 x 18 56-Pin SSOP T/R

The SN74ALVC7805 is suited for buffering asynchronous data paths up to 50-MHz clock rates and 13-ns access times. This device is designed for 3-V to 3.6-V VCC operation. Two devices can be configured for bidirectional data buffering without additional logic. The write clock (WRTCLK) and read clock (RDCLK) are free running and can be asynchronous or coincident. Data is written to memory on the rising edge of WRTCLK when WRTEN1 is high, WRTEN2\ is low, and input ready (IR) is high. Data is read from memory on the rising edge of RDCLK when RDEN\, OE1\, and OE2\ are low and output ready (OR) is high. The first word written to memory is clocked through to the output buffer, regardless of the RDEN\, OE1\, and OE2\ levels. The OR flag indicates that valid data is present on the output buffer. The FIFO can be reset asynchronously to WRTCLK and RDCLK. Reset (RESET\) must be asserted while at least four WRTCLK and four RDCLK rising edges occur to clear the synchronizing registers. Resetting the FIFO initializes the IR, OR, and half-full (HF) flags low and the almost-full/almost-empty (AF/AE) flag high. The FIFO must be reset upon power up. The SN74ALVC7805 is characterized for operation from 0C to 70C.