onsemi MM74HCT240WM

Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin SOIC W Rail

Inverting Octal 3-STATE Buffer

Bus Driver, HCT Series, 2-Func, 4-Bit, Inverted Output, CMOS, PDSO20

74HCT240 Tube 2005 Tin (Sn) logic receiver 7.2mA 7.2mA 28ns 801mg 500mW

FAIRCHILD SEMICONDUCTOR MM74HCT240WMBuffer, Inverting, 3-State, 8 Gate, 1 Input, 4.5V to 5.5V, SOIC-20

4¦ÌA Antiphase Tristate 8 8 2 4 4.5V 5.5V 7.2mA Buffer£¬Inverting 7.2mA SOIC-20 SMD mount 2.35mm(height)

Buffers & Line Drivers Inv Oct 3-STATE Buf

IC INVERTER DUAL 4-INPUT 20SOIC

INVERTING OCTAL TRISTATE BUFFE <AZ

74HCT CMOS, SMD, 74HCT240, SOIC20; Logic Device Type:Buffer, Inverting; Supply Voltage Range:4.5V to 5.5V; Logic Case Style:SOIC; No. of Pins:20; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (20-Jun-2011); Base Number:74; IC Generic Number:74HCT240; Logic Function Number:74240; Logic IC Base Number:74240; Logic IC Family:HCT; Logic IC Function:Octal Inverting Buffer/Line Driver (3-State); No. of Gates:8; No. of Inputs:1; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Package / Case:SOIC; Supply Voltage:5.5V; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:SMD

The MM74HCT240 and MM74HCT244 3-STATE buffers utilize advanced silicon-gate CMOS technology and are general purpose high speed inverting and non-inverting buffers. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low power Schottky devices, while retaining the low power consumption of CMOS. All three devices are TTL input compatible and have a fanout of 15 LS-TTL equivalent inputs. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. The MM74HCT240 is an inverting buffer and the MM74HCT244 is a non-inverting buffer. Each device has two active low enables (1G and 2G), and each enable independently controls 4 buffers. All inputs are protected from damage due to static discharge by diodes to VCC and Ground.