onsemi 6N137M

onsemi Logic gate output type optocoupler, Through hole mounting, 8needle, MDIPencapsulation

OPTOISO 5KV 1CH OPEN COLL 8DIP / Optocoupler Logic-Out Open Collector DC-IN 1-CH 8-Pin PDIP Tube

Logic Output Optoisolator 10Mbps Open Collector 5000Vrms 1 Channel 10kV/¦Ìs (Typ) CMTI 8-DIP

Optocoupler, Digital Output, 1 Channel, 5 kV, 10 Mbps, DIP, 8 Pins

6N137M Series 7 V 5000 Vrms 10 Mb/sec High Speed Logic Gate Optocoupler - DIP-8

onsemi Logic Gate Output Optocoupler, TH, 8-Pin, MDIP Package

Logic IC Output Optocoupler, 1-Channel, 1-Element, 5000V Isolation, 10MBps

OPTOCOUPLER, DIGITAL, 5KV, DIP-8; No. of Channels: 1 Channel; Isolation Voltage: 5kV; Data Rate: 10Mbps; Optocoupler Case Style: DIP; No. of Pins: 8Pins; Product Range: -; SVHC: No SVHC (27-Jun-2018); No. of Channels: 1Channels

Propagation Delay Time Max. ns = 100 / Supply Voltage Min. V = 4.5 / Supply Voltage Max. V = 5.5 / Power Dissipation (Pd) mW = 100 / Reverse Voltage (Vr) V = 5 / Package Type = DIP-8 / Output Type = Logic / Isolation Voltage kV = 5 / Output Fall Time ns = 10 / Output Rise Time ns = 30 / Operating Temperature Max. °C = 100 / Operating Temperature Min. °C = -40 / Channels = 1

The 6N137M, HCPL2601M, HCPL2611M single-channel and HCPL2630M, HCPL2631M dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. This output features an open collector, permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5mA providew a minimum output sink current of 13mA (fan out of 8). An internal noise shield provides superior common-mode rejection of typically 10kV/µs. The HCPL2601M and HCPL2631M has a minimum CMR of 5kV/µs. The HCPL2611M has a minimum CMR of 10kV/µs.