Analog Devices OP470GS

Op Amp Quad Low Noise Amplifier ±18V 16-Pin SOIC W Tube

VERY LOW-NOISE QUAD OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 1500uV Offset-Max, BIPolar, PDSO16

9mA 3V/μs 3.8nV/rtHz@ ±15V 6MHz 4 4 ±18V 400μV 15nA General Purpose SOIC-16 SMD mount 2.65mm(height)

The OP470 is a high-performance monolithic quad operational amplifier with exceptionally low voltage noise, 5nV/(root)Hz at 1kHz Max, offering comparable performance to PMI's industry standard OP27. The OP470 features an input offset voltage below 0.4mV, excellent for a quad op amp, and an offset drift under 2µV/°C, guaranteed over the full military temperature range. Open-loop gain of the OP470 is over 1,000,000 into a 10k Ohm load insuring excellent gain accuracy and linearity, even in high-gain applications. Input bias is under 25nA which reduces errors due to signal source resistance. The OP470's CMR of over 110dB and PSRR of less than 1.8µV/V significantly reduce errors due to ground noise and power supply fluctuations. Power consumption of the quad OP470 is half that of four OP27s, a significant advantage for power conscious applications. The OP470 is unity-gain stable with a gain-bandwidth product of 6MHz and a slew rate of 2V/µs. The OP470 offers excellent amplifier matching which is important for applications such as multiple gain blocks, low-noise instrumentation amplifiers, quad buffers, and low-noise active filters. The OP470 conforms to the industry standard 14-pin DIP pinout. It is pin compatible with the OP11, LM 148/149, HA4741, HA5104, and RM4156 quad op amps and can be used to upgrade systems using these devices. For higher speed applications the OP471, with a slew rate of 8V/µs, is recommended.