onsemi MM74HCT244MTC

Buffer-line Driver 8 Channel Non-Inverting 3 State CMOS 20-Pin TSSOP Rail

4¦ÌA 8 8 2 4 4.5V 5.5V 7.2mA Buffer,Non-Inverting LS-TTL 7.2mA TSSOP-20 6.5mm*4.4mm*900¦Ìm

74HCT244 Tube 2005 Nickel/Palladium/Gold (Ni/Pd/Au) logic driver 7.2mA 7.2mA 53ns 900mum 500mW

BUFFER, OCTAL, TRI-STATE, TSSOP-20; Logic Family / Base Number: 74HCT244; Logic Device Type: Buffer, Non Inverting; Logic Case Style: TSSOP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; Logic IC Fam

The MM74HCT240 and MM74HCT244 3-STATE buffers utilize advanced silicon-gate CMOS technology and are general purpose high speed inverting and non-inverting buffers. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low power Schottky devices, while retaining the low power consumption of CMOS. All three devices are TTL input compatible and have a fanout of 15 LS-TTL equivalent inputs. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. The MM74HCT240 is an inverting buffer and the MM74HCT244 is a non-inverting buffer. Each device has two active low enables (1G and 2G), and each enable independently controls 4 buffers. All inputs are protected from damage due to static discharge by diodes to VCC and Ground.