onsemi MC74LVXT4066DR2G

Quad Analog Switch/Multiplexer/Demultiplexer (Mux/Demux)

74LVXT Series 2 to 5.5 V Quad Analog Switch/Mux/Demux - SOIC-14

Analog Switch Quad SPST Automotive 14-Pin SOIC N T/R

Switches- General Purpose 2-6V ANLG Mux/Demux -55 to 85deg C

Signal Switch/Codec/Multiplexer

ANALOGUE SWITCH, QUAD, SPST, NSOIC-14

IC SWITCH SPST-NOX4 20OHM 14SOIC

QUAD 1-CHANNEL SGL POLE SGL THROW SWITCH PDSO14

SPST, 4 Func, 1 Channel, CMOS, PDSO14

ANALOGUE SWITCH, QUAD, SPST, NSOIC-14; No. of Channels: 4Channels; Analogue Switch Type: SPST; On State Resistance Max: 40ohm; Supply Voltage Range: 2V to 5.5V; Analogue Switch Case: NSOIC; No. of Pins: 14Pins; Operating Tempe

High-Performance Silicon-Gate CMOS The MC74LVXT4066 utilizes silicon-gate CMOS technology to achieve fast propagation delays low ON resistances and low OFF-channel leakage current. This bilateral switch/multiplexer/demultiplexer controls analog and digital voltages that may vary across the full power-supply range (from VCC to GND). The LVXT4066 is identical in pinout to the metal-gate CMOS MC14066 and the high-speed CMOS HC4066A. Each device has four independent switches. The device has been designed so that the ON resistances (RON) are much more linear over input voltage than RON of metal-gate CMOS analog switches. The ON/OFF control inputs are compatible with standard LSTTL outputs. The input protection circuitry on this device allows overvoltage tolerance on the ON/OFF control inputs allowing the device to be used as a logic-level translator from 3.0V CMOS logic to 5.0V CMOS Logic or from 1.8V CMOS logic to 3.0V CMOS Logic while operating at the higher-voltage power supply. The MC74LVXT4066 input structure provides protection when voltages up to 7V are applied regardless of the supply voltage. This allows the MC74LVXT4066 to be used to interface 5V circuits to 3V circuits.