Broadcom HCPL-2232-300E

Optocoupler Logic-Out Totem-Pole DC-IN 2-CH 8-Pin PDIP SMD Tube

Logic IC Output Optocoupler, 2-Channel, 2-Element, 3750V Isolation, 5MBps

Broadcom Logic gate output type optocoupler, dual channel, surface mount, 8needle, PDIPencapsulation

OPTOISO 3.75KV PUSH PULL 8DIP GW "Logic Output Optoisolator 5MBd Push-Pull, Totem Pole 3750Vrms 2 Channel 10kV/µs CMTI 8-DIP Gull Wing"

Optocoupler; No. of Channels:2; Isolation Voltage:3750Vrms; Optocoupler Output Type:Logic Gate; Input Current Max:5mA; Output Voltage Max:20V; Package/Case:8-SOIC; Common Mode Ratio:10K; Data Rate Max:5Mbps; Forward Current:1.8mA ;RoHS Compliant: Yes

OPTOCOUPLER, SMD, 5MBD; No. of Channels:2; Voltage, Isolation:3750V ac; Output Type:Schmitt Trigger; Input Current:1.8mA; Voltage, Output Max:20V; Case Style:SMD-8; Operating Temperature Range:-40°C to +85°C; Approval Bodies:CSA, IEC/EN/DIN EN 60747-5-2 Approved, UL Recognised; Baud Rate Bd:5Mbaud; CMR:1kV/µs; Current, If Max:1.6mA; External Depth:6.35mm; External Length / Height:3.56mm; No. of Pins:8; Optocoupler Type:Schmitt Trigger Output; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Termination Type:SMD; Voltage, Supply Max:20V; Voltage, Supply Min:4.5V; Width, External:9.65mm

The H CPL-22XX, HCPL-02XX,and HCNW22XX are optically coupled logic gates. TheHCPL-22XX, and H CPL-02XX contain a Ga Asp LED while theHCNW22XX contains an Alga As LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic compatible waveforms, eliminat-ing the need for additional wave shaping. A superior internal shield on theHCPL-2211/12, HCPL-0211, CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Functional Diagram A 0.1 uF bypass capacitor must be connected between pins 5 and 8.