Analog Devices ADCMP564BRQ

Comparator, 2 Func, 10000uV Offset-Max, 0.83ns Response Time, BIPolar, PDSO20

Comparator Dual -5.45V/5.25V 20-Pin QSOP Tube

IC COMPARATOR ECL DUAL HS 20QSOP

Non-RoHS Compliant GULL WING BIPOLAR Contains Lead with Latch Comparator -40C~85C 120mW 85dB ±1mV

Tube Complementary Differential ECL Open-Emitter 10muA TIN LEAD comparator circuit 3muA @ -5.2V5V 0.83ns 8.6614mm ±1mV

IC COMPARATOR 2 W/LATCH 20QSOP

The ADCMP563/ADCMP564 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing overdrive conditions, is a particularly important characteristic of high speed comparators. A separate programmable hysteresis pin is available on the ADCMP564. A differential input stage permits consistent propagation delay with a wide variety of signals in the common-mode range from −2.0 V to +3.0 V. Outputs are complementary digital signals that are fully compatible with ECL 10 K and 10 KH logic families. The outputs provide sufficient drive current to directly drive transmission lines terminated in 50 Ω to −2 V. A latch input, which is included, permits tracking, track-and-hold, or sample-and-hold modes of operation. The latch input pins contain internal pull-ups that set the latch in tracking mode when left open. The ADCMP563/ADCMP564 are specified over the industrial temperature range (−40°C to +85°C). Applications Automatic test equipment High speed instrumentation Scope and logic analyzer front ends Window comparators High speed line receivers Threshold detection Peak detection High speed triggers Patient diagnostics Hand-held test instruments Zero crossing detectors Line receivers and signal restoration Clock drivers