Analog Devices AD574AJN

Analog to Digital Converter Single SAR 12-Bit Parallel 28-Pin Plastic DIP W

Complete 12-bit AD Converter | IC ADC 12BIT SAR 28DIP

Single Channel Single ADC SAR 12-bit Parallel 28-Pin PDIP W Tube

ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, Bipolar, PDIP28

Bipolar Unipolar External Internal SAR Dual Analog to Digital Converter 0C~70C 16.5V 725mW 29ksps

IC, 12BIT ADC, DIP28, 574; Sampling Rate:29kSPS; Data Interface:Parallel; IC Case Style:DIP; No. of Pins:28; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (15-Dec-2010); A/D / D/A Features:Internal Reference, Microprocessor Compatible, Parallel O/P, Successive Approximation; Base Number:574; Conversion Time:35µs; IC Generic Number:574; IC Temperature Range:Commercial; Linearity Error:1%; Linearity Error ADC / DAC +:1LSB; Linearity Error ADC / DAC -:1LSB; Logic Function Number:574; No. of Bits:12; No. of Channels:1; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Package / Case:DIP; Power Dissipation Ptot Max:725mW; Sample Rate:0.029MSPS

The AD574A is a complete 12-bit successive-approximation analog-to-digital converter with 3-state output buffer circuitry for direct interface to an 8- or 16-bit microprocessor bus. A high precision voltage reference and clock are included on-chip, and the circuit guarantees full-rated performance without external circuitry or clock signals. The AD574A design is implemented using Analog Devices' Bipolar/I2L process, and integrates all analog and digital functions on one chip. Offset, linearity and scaling errors are minimized by active laser-trimming of thin-film resistors at the wafer stage. The voltage reference uses an implanted buried Zener for low noise and low drift. On the digital side, I2L logic is used for the successive-approximation register, control circuitry and 3-state output buffers. The AD574A is available in six different grades. The AD574AJ, K, and L grades are specified for operation over the 0°C to +70°C temperature range. The AD574AS, T, and U are specified for the -55°C to +125°C range. All grades are available in a 28-pin hermetically-sealed ceramic DIP. Also, the J, K, and L grades are available in a 28-pin plastic DIP and PLCC, and the J and K grades are available in ceramic LCC. The S, T, and U grades in ceramic DIP or LCC are available with optional processing to MIL-STD-883C Class B; the T and U grades are available as JAN QPL. The Analog Devices' Military Products Databook should be consulted for details on /883B testing of the AD574A.