Analog Devices AD5318ARUZ

DAC 8-CH Resistor-String 10-bit 16-Pin TSSOP Tube

Analog Devices 10-bit DAC 8-Ch SPI/QSPI/Microwire 16-Pin Single Output 167ksps

2.5 V to 5.5 V Octal Voltage Output 10-Bit DACs in 16-Lead TSSOP

AD5318ARUZ, 8-CHANNEL 10 BIT SERIAL DAC, 167KSPS, 16-PIN TSSOP

DAC, 10BIT, TSSOP-16, -40 TO 125DEG C; Available until stocks are exhausted Alternative available

Dac, 10Bit, Tssop-16, -40 To 125Deg C; |Analog Devices, Inc. AD5318ARUZ

D/A Converter, 1 Func, Serial Input Loading, 7us Settling Time, PDSO16

The AD5308/AD5318/AD5328 are octal 8-, 10-, and 12-bit buffered voltage output DA Cs in a 16-lead TS SOP. They operate from a single 2.5 V to 5.5 V supply, consuming 0.7 mA typ at 3 V. Their on-chip output amplifiers allow the outputs to swing rail-to-rail with a slew rate of 0.7 V/\Theta s. The AD5308/AD5318/ AD5328 use a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICRO WIRE, and DSP interface standards. The references for the eight DA Cs are derived from two reference pins (one per DAC quad). These reference inputs can be configured as buffered, unbuffered, or VDD inputs. The parts incorporate a power-on reset circuit, which ensures that the DAC outputs power up to 0 V and remain there until a valid write to the device takes place. The outputs of all DA Cs may be updated simultaneously using the asynchronous LDAC input. The parts contain a power-down feature that reduces the current consumption of the devices to 400 nA at 5 V (120 nA at 3 V). The eight channels of the DAC may be powered down individually. All three parts are offered in the same pin out, which allows users to select the resolution appropriate for their application without redesigning their circuit board.