Time Mark 4062

PUMP-UP CTRLR,(98069701)

This Pump-Up Controller provides total control for duplex pumping systems. It monitors, controls and displays the liquid level in a tank or reservoir, up to a depth of 34.6 feet. The input can be from any 2 or 3-wire transducer with a 4-20mA output that represents 0 to 34.6 feet. A 24VDC regulated probe supply is included. A Level Simulator is provided to aid in programming these five set points, Low Alarm, Level 2, Level 1, Pumps Off and High Alarm. A universal zero to 30 second On Delay can be programmed to prevent outputs from closing due to input fluctuations caused by turbulent conditions. An additional 4-20mA output with zero and span controls is provided for a chart recorder or other external device. Four heavy-duty 10 amp, 120V contacts are provided for pump control and alarm activation. An auto-dialer or other emergency device can be activated with the SPDT power loss relay. This relay is held open when power is applied. Communications capable via RS-485/Modbus. Pump outputs include duplex alternation as well as hand-off-auto switches. Pump run-time can be displayed for each pump with tenth of an hour resolution, up to 99,999. 9 hours. This unit can be panel-mounted (11 1/8 x 4 5/8) or surface-mounted using the optional surface-mounting kit (Model 4000).