Texas Instruments TPS60132PWPR

ROHS3Compliant Fixed Positive DUAL Switching Regulator IC 85C 320kHz 150mA 4.4mm

Charge Pump No 320KHz Fixed 1 5V 5V 5.4V 2.7V HTSSOP-20 SMD mount，glue mount

IC REG CHARGE PUMP 5V 20HTSSOP "Charge Pump Switching Regulator IC Positive Fixed 5V 1 Output 150mA 20-PowerTSSOP (0.173"", 4.40mm Width)"

DC/DC Charge Pump Converter IC; Primary Input Voltage:5.4V; No. of Outputs:1; Output Voltage:5V; Output Current:150mA; No. of Pins:20; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.4V ;RoHS Compliant: Yes

The TPS6013x step-up, regulated charge pumps generate a 5-V 4%output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries or one Lithium or Lilon battery). The output current is 300 mA for the TPS60130/ TPS60131 and 150 mA for the TPS60132/ TPS60133, all from a 3-V input. Only four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 3-V input, all ICs can start with full load current. The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60130 and TPS60132 include a low-battery comparator; TPS60131 and TPS60133 feature a power-good output. The logic shut-down function reduces the supply current to 1 uA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during startup. This dc/dc converter requires no inductors and therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).