Texas Instruments LM2575T-12

IC REG BUCK 12V 1A TO220-5 Buck Switching Regulator IC Positive Fixed 12V 1 Output 1A TO-220-5

Buck No 52KHz Fixed 1 12V 12V 40V 4V TO-220-5 Through hole mounting 9.25mm(height)

SIMPLE SWITCHER 1 AMP STEP-DOWN VOLTAGE REGULATOR Switching Regulator, Voltage-mode, 1A, 63kHz Switching Freq-Max, PSFM5

SIMPLE SWITCHE 1A Step-Down Voltage egulator 5-TO-220 -40 to 125

Conv DC-DC 4.75V to 40V Step Down Single-Out 12V 1A 5-Pin(5+Tab) TO-220 Tube

SWITCHING REG 1A 12V, 2575, TO2205; Voltage Regulator Type:Switching, Step Down (Buck), Inverting; Max Input Voltage:40V; Max Output Voltage:12V; Max Output Current:1A; Percentage Accuracy:4%; Max Switch Output Current Isw:1A; ;RoHS Compliant: Yes

SWITCHING REG 1A 12V, 2575, TO2205; Primary Input Voltage:25V; No. of Outputs:1; Output Voltage:12V; Output Current:1A; Voltage Regulator Case Style:TO-220; No. of Pins:5; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (20-Jun-2011); Accuracy %:4%; Base Number:2575; Device Marking:LM2575T-12; Frequency:52kHz; IC Generic Number:2575; Input Voltage Max:40V; Input Voltage Min:14V; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Output Current Max:1A; Output Voltage Max:12V; Package / Case:TO-220; Power Supply IC Type:Step-down switching regulator; Supply Voltage Max:40V; Supply Voltage Min:4V; Switch Output Current Isw Max:1A; Termination Type:Through Hole; Voltage Regulator Type:Switching, Step Down (Buck), Inverting

The LM2575 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, 15V, and an adjustable output version. Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2575 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in many cases no heat sink is required. A standard series of inductors optimized for use with the LM2575 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed +-4% tolerance on output voltage within specified input voltages and output load conditions, and +-10% on the oscillator frequency. External shutdown is included, featuring 50 uA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.