Texas Instruments 74ACT16373DL

4.5V~5.5V D-Typelocking Latch 9.3ns SSOP-48-300mil Latches ROHS

74ACT16373 Tube ACT 74ACT latch circuit 24mA 24mA 14.2ns 600.301152mg -40C~85C

D-Type Transparent Latch ACT 2, 8μA, 9.3ns, Non-Inverting, Tri-State, 2-Ch, 4.5V-5.5V, 24mA SSOP-48 SMD 15.88mm × 7.49mm × 2.59mm

IC, LATCH, D-TYPE, SMD; Latch Type:D Type Transparent; Output Current:24mA; Propagation Delay:11.1ns; No. of Bits:16; IC Output Type:Tri State; Supply Voltage Range:4.5V to 5.5V; Logic Case Style:SSOP; No. of Pins:48; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (19-Dec-2011); Base Number:7416373; Logic IC Base Number:7416373; Logic IC Family:ACT; Logic IC Function:16bit D-Type Transparent Latch with 3-State Output; Output Type:Tri State; Package / Case:SSOP; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:SMD

The SN54ACT16373 and 74ACT16373 are 16-bit D-type transparent latches with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. The Q outputs of the latches follow the data (D) inputs if enable C is taken high. When C is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable input can be used to place the outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines in a bus-organized system without need for interface or pullup components. does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The 74ACT16373 is packaged in TI's shrink small-outline package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area. The SN54ACT16373 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16373 is characterized for operation from -40°C to 85°C.