Renesas CA3140MZ

CA140 Series 4.5 MHz 9 V/us 36 V BiMOS Operational Amplifier - SOIC-8

Lead Free Tin Not Qualified GULL WING OPERATIONAL AMPLIFIER Amplifier 3.2dB 9V/mus 125C 4.5MHz

9 V/us 1 4.5MHz 4V~36Vºô2V~18V General Purpose SOIC-8_150mil Operational Amplifier ROHS

4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output

Operational Amplifier, 1 Func, 15000uV Offset-Max, BIMOS, PDSO8

Op Amp Single GP ±18V/36V Automotive 8-Pin SOIC N

OP AMP, MOS IP/BIPOLAR OP, 3140; No. of Amplifiers:1; Op Amp Type:High Speed; Gain, Bandwidth -3dB:3.7MHz; Slew Rate:9; Voltage, Supply Min:4V; Voltage, Supply Max:36V; Termination Type:SMD; Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-55°C to +125°C; Amplifier IC Type:BIMOS; Bandwidth:4.5MHz; Base Number:3140; Device Marking:CA3140M; IC Generic Number:3140; Logic Function Number:3140; Operational Amplifier Features:FET Input; Temp, Op. Max:125°C; Temp, Op. Min:-55°C; Voltage, Input Offset Max:15mV; Voltage, Supply +Nom:15V

The CA3140A and CA3140 are integrated circuit operational amplifiers that combine the advantages of high voltage PMOS transistors with high voltage bipolar transistors on a single monolithic chip. The CA3140A and CA3140 BiMOS operational amplifiers feature gate protected MOSFET (PMOS) transistors in the input circuit to provide very high input impedance, very low input current, and High-Speed performance. The CA3140A and CA3140 operate at supply voltage from 4V to 36V (either single or dual supply). These operational amplifiers are internally phase compensated to achieve stable operation in unity gain follower operation, and additionally, have access terminal for a supplementary external capacitor if additional frequency roll-off is desired. Terminals are also provided for use in applications requiring input offset voltage nulling. The use of PMOS field effect transistors in the input stage results in common mode input voltage capability down to 0. 5V below the negative supply terminal, an important attribute for single supply applications. The output stage uses bipolar transistors and includes built-in protection against damage from load terminal short circuiting to either supply rail or to ground. FN957 The CA3140A and CA3140 are intended for operation at supply voltages up to 36V (±18V).