onsemi FXL5T244BQX

Voltage Level 24ns@ 1.1Vto1.3V , 1 5 1.1V 3.6V 1.1V~3.6V 1.1V~3.6V DQFN-14 , 3mm*2.5mm*800¦Ìm

FXL5T244 Series 3.6 V Low Voltage Dual Supply 5-Bit Signal Translator - DQFN-14

Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs

VOLTAGE LEVEL TRANSLATOR, 5-BIT, DQFN-14; No. of Inputs: 5; Output Current: -; Propagation Delay: 3.5ns; No. of Pins: 14Pins; Logic Case Style: DQFN; Supply Voltage Min: 1.1V; Supply Voltage Max: 3.6V; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Logic Type: Voltage Level Translator; Product Range: -; Automotive Qualification Standard: -; MSL: MSL 1 - Unlimited; SVHC: No SVHC (27-Jun-2018)

The FXL5T244 is a configurable dual-voltage-supply translator designed for one-way (unidirectional) voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. A Inputs and the OE# Control Pin track the VCCI level, and Y Outputs track the VCCO level. Both inputs and outputs are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for unidirectional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCC to be powered-up first. The device also contains power down control circuits that place the device in 3-STATE if either VCC is removed. The OE# input, when HIGH, disables the outputs by placing them in 3-STATE condition. Product Highlights: One-way (unidirectional) translation between any 2 levels from 1.1V to 3.6V Fully configurable, inputs and outputs track respective VCC levels Non-preferential power-up sequencing; either VCC may be powered-up first Outputs remain in 3-STATE until active VCC level is reached Outputs switch to 3-STATE if either VCC is at GND Power-off protection Control input (OE#) level is referenced to VCCI voltage Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package ESD protection exceeds: 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7) 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7) 1kV CDM ESD (per ESD STM 5.3) 200V MM ESD (per JESD22-A115 & ESD STM5.2)