onsemi AMIS39100PNPB3G

MOSFET DRVR 0.83A 8-OUT Hi Side 28-Pin SOIC W Rail

Octal High Side Driver with Protection

IC DVR OCT HI SIDE W/PROT 28SOIC

Line Driver, 8 Func, 8 Driver, PDSO28

The AMIS-39100 is a general purpose IC with eight integrated high side (HS) output drivers. The device is designed to control the power of virtually any type of load in a 12 V automotive environment such as transistor gates relays LEDs etc. Each of the output drivers of the AMIS-39100 is able to drive up to 275 mA continuously when connected to an inductive load of 300 mH. Even higher driver output currents can be obtained as long as the total current of the device is limited. The integrated charge pump of the AMIS-39100 which uses only one low cost external capacitor avoids thermal runaways even if the battery voltage is low. The HS drivers withstand short to ground (even when AMIS-39100 has lost its ground connection) short to the battery and has overcurrent limitation. In case of a potential hazardous situation the drivers are switched off and the diagnostic state of the HS drivers can be read out via serial peripheral interface (SPI). In case of a short to ground the output driver is deactivated after a de-bounce time. The AMIS-39100 can be connected to a 3.3 V or 5.0 V microcontroller by means of a SPI interface. This SPI interface is used to control each of the output drivers individually (on or off) and to read the status of each individual output driver (read-back of possible error conditions). This allows the detection of error situations for each driver individually. Furthermore the SPI interface can be used to read-back the status of the built-in thermal shutdown protection. The AMIS-39100 has a low power mode and excellent handling and system ESD characteristics.