Analog Devices EVAL-ADF790XEBZ

ADF7901/ADF7902 RF Transceiver Evaluation Kit
Production
Page du fabricantFiche technique

Prix et stock

Fiches techniques et documents

Téléchargez les fiches techniques et la documentation du fabricant pour Analog Devices EVAL-ADF790XEBZ.

Farnell

Datasheet12 pagesIl y a 20 ans
Datasheet13 pagesIl y a 20 ans

element14 APAC

Chaîne d'approvisionnement

Lifecycle StatusProduction (Last Updated: 5 years ago)
Manufacturer Lifecycle StatusPRODUCTION (Last Updated: 5 years ago)

Pièces détachées

Analog DevicesMAX2204EVKIT+
Eval Kit MAX2204 (RF Power Det
Texas InstrumentsLMV228TLEVAL
0 Power Detector CDMA Active Board(s) Power Detector, CDMA 450MHz~2GHz
Analog DevicesMAX2470EVKIT
MAX2470 10MHz to 500MHz VCO Buffer Amplifier Evaluation Board
Analog DevicesMAX2634EVKIT+
Ultra-Low-Current Low-Noise Amplifier for RKE Solutions with Low-Noise Figure and Shutdown Mode
Texas InstrumentsTRF37T05EVM
Evaluation Module For TRF37T05 Direct-launch Quadrature Modulator
Texas InstrumentsTRF3722EVM
TRF3722 Quadrature Modulator Evaluation Module

Descriptions

Descriptions de Analog Devices EVAL-ADF790XEBZ fournies par ses distributeurs.

ADF7901/ADF7902 RF Transceiver Evaluation Kit
Evaluation Board For High Performance Ism Band Ook/Fsk Transmitter IC
Evaluation kit comprising ADF7901 transmitter and ADF7902 receiver boards (369.5 MHz - 395.9 MHz)
Ciiva
ANALOG DEVICES EVAL-ADF790XEBZ ADF790X EVAL BOARD
The ADF7901 is a low power OOK/FSK UHF transmitter designed for use in RF remote control devices. The device is capable of Frequency Shift Keying (FSK) modulation on eight different channels, selectable by three external control lines. OOK modulation is performed by modulating the PA control line. The on-chip VCO operates at 2x the output frequency. The divide by 2 at the output of the VCO reduces the amount of PA feedthrough. As a result of this, OOK modulation depths of greater than 50dB are easily achievable. The FSK_ADJ and ASK_ADJ resistors can be adjusted in the system to optimize output power for each modulation scheme. An additional 1.5dB of output power is provided for the lower bank of channels to adjust for antenna performance. The CE line allows the transmitter to be powered down completely. In this mode the leakage current is typically 0.1µA.

Alias du fabricant

Analog Devices possède plusieurs marques à travers le monde que les distributeurs peuvent utiliser comme noms alternatifs. Analog Devices peut également être connu sous les noms suivants :

  • Analog Devices Inc
  • ANALOG
  • ADI
  • ANALOG DEVICE
  • ANALOG DEV
  • AD
  • ANA
  • PMI
  • Analog Devices Inc/Maxim Integrated
  • ADV
  • ADA
  • ANALOG DEVIC
  • PMI/AD
  • ANALOG DEVI
  • AD/PMI
  • STOCK
  • Analog Devices / Linear Technology
  • ANALOG INTERGRATIONS CORP
  • AD - Analog Devices
  • PRECISION MONOLITIC INC
  • ADI (Analog Devices Inc)
  • ANADEV
  • Analog Devices / Hittite
  • ANALOG DEVICES (ADI)
  • ANLOGDEVIC
  • Analog Devices Inc.
  • Maxim Analog Devices
  • Analog Devices / Maxim Integrated