Analog Devices AD9200ARS

IC ADC 10BIT PIPELINED 28SSOP 10 Bit Analog to Digital Converter 1 Input 1 Pipelined 28-SSOP

ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28

1-Channel Single ADC Pipelined 20Msps 10-bit Parallel 28-Pin SSOP Tube

2.7V~5.5V 57dB 20Msps 10bit 10 Parallel Differential£¬Single-Ended 2.7V~5.5V Pipelined SSOP-28 SMD mount 10.2mm*5.3mm*1.75mm

The AD9200 is a monolithic, single supply, 10-bit, 20 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9200 uses a multistage differential pipeline architecture at 20 MSPS data rates and guarantees no missing codes over the full operating temperature range. The input of the AD9200 has been designed to ease the development of both imaging and communications systems. The user can select a variety of input ranges and offsets and can drive the input either single-ended or differentially. The sample-and-hold (SHA) amplifier is equally suited for both multiplexed systems that switch full-scale voltage levels in successive channels and sampling single-channel inputs at frequencies up to and beyond the Nyquist rate. AC coupled input signals can be shifted to a predetermined level, with an onboard clamp circuit (AD9200ARS, AD9200KST). The dynamic performance is excellent. The AD9200 has an onboard programmable reference. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. A single clock input is used to control all internal conversion cycles. The digital output data is presented in straight binary output format. An out-of-range signal (OTR) indicates an overflow condition which can be used with the most significant bit to determine low or high overflow. The AD9200 can operate with supply range from 2.7 V to 5.5 V, ideally suiting it for low power operation in high speed portable applications. The AD9200 is specified over the industrial (­40°C to +85°C) and commercial (0°C to +70°C) temperature ranges. PRODUCT HIGHLIGHTS Low Power The AD9200 consumes 80 mW on a 3 V supply (excluding the reference power). In sleep mode, power is reduced to below 5 mW. Very Small Package The AD9200 is available in both a 28-lead SSOP and 48-lead LQFP packages. Pin Compatible with AD876 The AD9200 is pin compatible with the AD876, allowing older designs to migrate to lower supply voltages. 300 MHz On-Board Sample-and-Hold The versatile SHA input can be configured for either single-ended or differential inputs. Out-of-Range Indicator The OTR output bit indicates when the input signal is beyond the AD9200’s input range. Built-In Clamp Function Allows dc restoration of video signals with AD9200ARS and AD9200KST.