Texas Instruments SN75ALS163DW

ROHS3Compliant SCHMITT TRIGGER GULL WING Half Transceiver 0C~70C 2.65mm 80mA 5V

Line Circuit Interface ICs Octal Genral Purpose InterfacE Bus Trans

IC TRANSCEIVER HALF 8/8 20SOIC

Octal Transmitter/Receiver 20-Pin SOIC Tube

The SN75ALS163 octal general-purpose interface bus transceiver is a monolithic, high-speed, advanced low-power Schottky device. It is designed for two-way data communications over single-ended transmission lines. The transceiver features driver outputs that can be operated in either the open-collector or 3-state mode. If talk enable (TE) is high, these outputs have the characteristics of open-collector outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places the outputs in the high-impedance state. The driver outputs are designed to handle loads of up to 48 mA of sink current. Each receiver features pnp transistor inputs for high input impedance and 400mV minimum of hysteresis for increased noise immunity. Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus and receiver outputs. The outputs do not load the bus when VCC = 0. The SN75ALS163 is characterized for operation from 0C to 70C. H = high level, L = low level, X = irrelevant, Z = high-impedance state